20
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
V.062414
F2 Time
Press
F2
to set the Flash Exposure Time. The minimum flash time is 0.5 seconds and the maximum is 10
seconds. The current flash time displays on the lower line. Press the arrow up (increase) and arrow down
(decrease) buttons to change the flash time.
Note: The flash time on the digital controller should be set for the maximum of 10 seconds when
operating in the PLC mode. This is due to the fact that whichever timer (flash exposure time on the press
or flash exposure time on the flash cure) is set for the shorter time will control the flash shut-down.
F3 Section
The quartz heating elements are arranged in three sections:
OUTSIDE
(O),
CENTER
(C) and
INSIDE
(I). Press
F3
to select lamp sections for curing operation; the control displays
SECT
on the top line, and
O C I
on the lower
line.
O C I
displayed indicates that all three sections are operating.
To deselect a section, press
F3
until the section letter flashes. Press the arrow down button; the indication
changes to a dash "-" and the section is now inoperative.
F3 Section (Red Chili 1418, 1618)
The quartz heating elements are arranged in three sections:
LEFT
(L),
CENTER
(C) and
RIGHT
(R). Press
F3
to
select lamp sections for curing operation; the control displays
SECT
on the top line, and
L C r
on the lower line.
L C r
displayed indicates that all three sections are operating.
To deselect a section, press
F3
until the section letter flashes. Press the arrow down button; the indication
changes to a dash "-" and the section is now inoperative.
Содержание Red Chili 1418
Страница 1: ...Red Chili Nv3 Part MAN REDCHILI 95 00 USD V 062414...
Страница 2: ......
