M&R Red Chili 1418, Руководство пользователя

Страница: 16 / 43

16 M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
V.062414
4.2.2 Install Press PLC Signal Cable
The unit is designed to receive operational signals from the flash sensor mounted on the unit, foot pedal or the
press PLC.
WARNING : Ensure none of the pallets are positioned under the unit for an excessive
amount of time while the unit is on. Extreme heat can damage pallets, garments and/or cause a fire.
1. Place the Press PLC/Foot Pedal/Flash Sensor switch up in the Press PLC position (1).
2. Install the signal cable from the socket (1) on the unit to the plug socket (2) located on the lower
electrical enclosure of the press. The remaining plugs are for installation of additional unit systems.