Set-Up Instructions
Glen Ellyn, Illinois
10
Chameleon
Installation of Duo-Deck
The unique design of the Chameleon Duo-Deck offers
Screen Printers additional flexibility for printing multiple
print jobs on one press, or facilitating the printing of sample
prints on multi-color jobs. The Duo-Deck is easily installed
on existing Chameleon presses using the following proce-
dure. You will receive three pieces for installation. Two
Timkin bearings and the upper carousel assembly.
1. Using a 5/16” wrench, remove the two allen cap bolts
with lock washers located on the top center shaft assembly.
2. Remove the end cap plate and spacer.
3. Remove the spacer sleeve assembly. Be sure that the
Timkin bearing remains in place.
4. After removing the spacer sleeve assembly, install one of
the two Timkin bearings. Be sure that the bearing is installed
with the proper side up as shown in the illustration.
5. Carefully lower the upper deck carousel over the center
index shaft. Although the illustration below does not include
the print head assembly hardware, the upper deck carousel
that is shipped to you will include these print head assem-
blies. This illustration was prepared to give the reader a
clearer view of the assembly of the upper carousel to the
center index shaft.
6. Install the second upper Timkin bearing.
7. Install rubber “o” ring.
