background image

Specifications

Glen Ellyn, Illinois

3

Chameleon

NOTE: To convert an existing 4 color/4 station Chameleon to a Duo Deck 10/4, simply add a 6 color upper carousel to the existing 4/4.
The result will be 4 print heads on the lower carousel, and 6 print heads on the upper carousel. To convert an existing 6/4 Chameleon
to a Duo Deck 10/4, or an existing 6/6 Duo Deck to a 10/6, simply add an upper carousel with an additional 6 print heads and remove
one existing print head from the lower carousel, resulting in five print heads on the lower deck and six print heads on the upper deck.

To convert an existing 8/4 to a Duo Deck 14/4, add a 7 color upper carousel to the 8/4 and remove one color from the existing lower
carousel. The result is 7 colors on the top deck and 7 colors on the lower deck.

To convert an existing 8/8 to a 14/8, add an additional upper deck with 7 colors and remove one color from the lower deck. The result
is 7 colors on the top deck and 7 colors on the lower deck.

Model No.

# of Colors

# of Stations

Max. Frame Size

Standard Pallet Size

Dimensions (dia x ht)

CHAM1-4-4

4

4

32” x 36”

16” x 22”

135” x 63”

(81.2 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(342.9 cm x 160.0 cm)

CHAM1-6-4

6

4

32” x 36”

16” x 22”

135” x 63”

(81.2 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(342.9 cm x 160.0 cm)

CHAM1-6-6

6

6

32” x 36”

16” x 22”

135” x 63”

(81.2 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(342.9 cm x 160.0 cm)

CHAM1-10-6

10

6

26” x 36”

16” x 22”

135” x 75”

(66.0 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(342.9 cm x 190.5 cm)

CHAM2-8-4

8

4

26” x 36”

16” x 22”

149” x 63”

(66.0 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(378.4 cm x 160.0 cm)

CHAM2-8-8

8

8

26” x 36”

16” x 22”

149” x 63”

(66.0 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(378.4 cm x 160.0 cm)

CHAM2-14-8

14

8

26” x 36”

16” x 22”

149” x 75”

(66.0 cm x 91.4 cm)

(40.6 cm x 55.8 cm)

(378.4 cm x 190.5 cm)

Содержание Chameleon CHAM1-10-6































Отзывы: