Assembly Instructions
Glen Ellyn, Illinois
7
Chameleon
Rotate the pallet, with the level reading from the front to the
back of the pallet, so that it aligns with each of the lower
index base leveling pads and note the level reading. When
the pallet reads level at each of the four corners of the index
base, the center index shaft will be plumb. If the center shaft
is not plumb, adjust the leveling pads slightly up or down,
whichever is required, and recheck the level reading on the
opposite side (Figure 10). When the center shaft is plumb,
the pallet with the level will read level no matter where it is
located around the index base.
Compressed Air Installation
The Chameleon is offered with optional pneumatic screen
frame clamps designed to securely hold screen frames in
place in the screen holder assembly. If your Chameleon
includes this option, you will need to attach a compressed air
supply to the incoming air connection located at the center
bottom of the chassis (Figure 11). The requirements for the
compressed air supply to the press is 100 P.S.I. @ 3 C.F.M.
Figure 11
Figure 10
