![background image](http://html.mh-extra.com/html/mandc/gentwo-pma1000/gentwo-pma1000_instruction-manual_682431005.webp)
4
PMA1000/PMA1000L | 1.00.00
www.mc-techgroup.com
Table of Illustrations
Fig. 1: Product label is on the back of the PMA1000/PMA1000L
13
Fig. 2: Paramagnetic measuring cell
14
Fig. 3: Electronic evaluating system to measure oxygen concentration
15
Fig. 4: Flow chart
16
Fig. 5: Enclosure front view
18
Fig. 6: Enclosure side view
19
Fig. 7: Rear view PMA1000
19
Fig. 8: Inside view PMA1000
20
Fig. 9: Sensor module
20
Fig. 10: I/O module
21
Fig. 11: Gas connections and pin assignment diagram
22
Fig. 12: Startup screen of the 1-Channel configuration
24
Fig. 13: Menu structure overview
26
Fig. 14: System status line
27
Fig. 15: Menu bar with the menu items M1 to M6
27
Fig. 16: Main display area
28
Fig. 17: Language selection window
29
Fig. 18: M1/S1 - M&C contact information
29
Fig. 19: Swipe to navigate through the sections
29
Fig. 20: M1/S2 - Analyzer configuration
30
Fig. 21: Detailed information about the GUI software version
30
Fig. 22: M1/S3 - Pneumatic connections of the analyzer
31
Fig. 23: M1/S4 - Operating hours counter (OHC)
31
Fig. 24: M2/S1 - Start screen of the home button
32
Fig. 25: M2/S2 - Detailed view of the measuring parameters
32
Fig. 26: M2/S2 - Detailed view during warm-up period
33
Fig. 27: M2/S2 - Using the zoom button
33
Fig. 28: Zoomed and highlighted area
33
Fig. 29: M2/S3 - List view of the measured values
34
Fig. 30: M3/S1 data logger screen
35
Fig. 31: M3/S1 - Recorded data selection screen
35
Fig. 32: Calibration symbols to highlight calibration procedures
36
Fig. 33: M4/S1 Edit buttons for measuring range and operating parameter settings
36
Fig. 34: Highlighted scroll bar to select measuring range
37
Fig. 35: Parameter list
37
Fig. 36: Highlighted scroll bar to set operating parameter Lim1
38
Fig. 37: Highlighted scroll bar to set operating parameter Lim2
38
Fig. 38: M4/S2 screen with ‘Restart’ button
39
Fig. 39: M4/S2 Settings menu and parameter screen
40
Fig. 40: Basic settings for channel 1
41
Fig. 41: Keypad
41
Fig. 42: Channel-specific settings list
42
Fig. 43: After selecting ‘2 = System’, the screen with system settings opens
45
Fig. 44: Scroll bar with ‘4=Updates’ displayed in the gray frame
46