Mandalay 2006 Presidio, Руководство пользователя

Страница: 108 / 130

1. Before entering the LP Gas bulk plant or service station, make sure all pilot lights are
extinguished. Shut off gas to all appliances by closing the LP Gas main shut off
valve.
2. Extinguish open flames and smoking materials.
3. Never remove the LP Gas tank from the motorhome. Always drive the motorhome to
the gas supplier to fill.
4. Have the supplier connect the fill nozzle to the tank fill connection.
5. Always remember to close the supply valve, and open the 20% liquid level valve.
6. Never use a wrench to close the service or the 20% liquid level valve. If when closing
by hand, leaking occurs, have the valve repaired or replaced.
7. Drive at least one mile from the LP Gas supplier before relighting pilot lights or
appliances. This will allow any minimal leakage which occurred while filling the tank
to dissipate. DO NOT light pilot lights if you continue to smell LP Gas. Shut off the
Supply Valve. Allow the motorhome to ventilate for 30 minutes. If you still detect LP
Gas odor, have the source of the leak located and repaired.
Never use any other tank than the one furnished with the motorhome. If the tank must be
replaced, check with your dealer for correct tank specifications and replacement
procedure.
WARNING: Make sure that the tank is not filled beyond the 80% liquid level. If
the tank has been over-filled, make sure the LP supplier bleeds out the
excess. Over-filling the LP Gas container does not allow for the necessary
20% vapor expansion space that can result in uncontrolled gas flow which
can cause fire or explosion.
WARNING: Make sure the tank service valve is accessible at all times. In an
emergency, it may be necessary to shut off the valve quickly.
9-2
LP GAS SYSTEMS
2005 PRESIDIO
FILLING THE LP GAS TANK