Mandalay 2006 Presidio, Руководство пользователя

Страница: 101 / 130

TO EMPTY THE HOLDING TANKS
1. Remove the sewer drain hose from its storage compartment inside of the systems
compartment.
2. Remove the cap from the vehicle sewage drain, and connect the drain hose to it.
3. Attach the other end of the flexible drain line to the dump station inlet. Make sure both
ends of the flexible drain lines are securely attached.
4. Drain the black tank first, by pulling the termination valve handle toward you. Make
sure to allow sufficient time for the tank to completely drain, and then rinse the tank
with several gallons of water by flushing the stool. Close the valve on the stool and
let it fill before releasing the tank. This creates additional force to flush the tank more
completely.
5. Drain the gray water tank by pulling the termination valve handle toward you.
Draining the gray water tank last, with its soapy water helps to further rinse the drain
and flexible hose.
6. When tanks are emptied, close termination valves by pushing handles back to the
closed position.
7. Remove flexible drain hose and wash it thoroughly with clean water. Remove the
other end from the dump station inlet, and replace it in the storage compartment.
Secure the sewer hose storage cover, and replace the caps on both the motorhome
outlet and the dump station inlet.
The following guidelines will help to ensure trouble free operation:
1. Never put anything in the black water tank other than toilet paper specifically for
Recreation Vehicle systems.
2. Do not put automotive antifreeze, household toilet cleaners or drain cleaners, or any
solid material into the waste water system.
3. Always use chemicals in the black water system that are made especially for this
purpose.
4. When cleaning components of the waste water system, use cleaners made for
Recreation Vehicle systems.
5. Always keep the drain cap in place, and termination valves closed.
6. After every third time the holding tanks are emptied, fill and flush both tanks with
clean fresh water a couple of times to keep them clear and clean.
NOTE: If connecting to a campsite sewer inlet, DO NOT open termination valves until
tanks are ¾ full. DO NOT keep black water valve open while parked. Wastes are NOT
flushed directly into the sewer system. Only liquid waste is drained, therefore, water
must accumulate, and chemicals in tank need time to break down solids before they
can be released. If draining gray water tank directly into sewer inlet while parked, make
sure to close termination valve for a period of time before leaving, allow some water to
accumulate in tank to use for flushing drain line and flexible hose.
8-5
WATER SYSTEMS
2005 PRESIDIO