MANDAKO REDDI-ARM 10 Series, Руководство оператора

Страница: 38 / 53

Reddi-Arm Operator’s Manual
Mandako Agri Marketing (2010) Ltd. Page 38
3.11 STORAGE
3.11.1 Place in storage:
At the end of the season, the unit should be thoroughly
inspected and prepared for storage. Repair or replace any
worn or damaged components to prevent any
unnecessary down time at the beginning of the next
season.
Follow this procedure before storing:
1. Remove all entangled material.
2. Thoroughly wash the unit with a pressure washer or
water hose to remove all dirt, mud, or debris.
3. Lubricate all grease points as per section 4.2. Make
sure all grease cavities have been filled with grease
to remove any water residue from washing.
4. Inspect all hydraulic hoses, couplers and fittings.
Tighten any loose fittings. Replace any hose that is
badly cut, nicked, abraded, or is separating from the
crimped end of a fitting.
5. Touch up all paint nicks and scratches to prevent
rusting.
6. Move the unit to its storage area. Inside a building is
ideal.
7. Place planks under the jack for added support if
required.
8. Place planks at tires.
9. Unhook the Reddi-Arm from the tow vehicle (reverse
procedures in section 3.7).
10. Place input shaft in storage location.
11. Store unit in area away from human activity.
12. Do not allow children to play on or around stored
Reddi-Arm.
13. Apply a rust inhibitor or heavy grease to the exposed
hydraulic cylinder rams to prevent rusting. Remove
inhibitor or grease before using machine again.
Fig. 45 Stored
Fig. 46 Input Driveline Stored