background image

Reddi-Arm Operator’s Manual 

Mandako Agri Marketing (2010) Ltd. 

Page 2

LIMITED WARRANTY: 

 

Mandako Agri Marketing (2010) Ltd. (“MANDAKO”) warrants for a period of one (1) year from the date of delivery 

to the purchaser that any new machinery purchased from MANDAKO (the “Product”) will be free of manufacturing 

and materials defects (the “Covered Defects”).  Before using the Product, the purchaser shall determine the 

suitability of the Product for its intended use.  This Limited Warranty is non-transferable and valid to the purchaser 

of the Product only. 

 

Except for the Covered Defects, this Limited Warranty shall not apply to any other defects  or  problems in the 

Product, including without limitation: (i) alterations, changes, replacements  or repairs  to the  Product  made by 

anyone other than MANDAKO or MANDAKO authorized Dealers; (ii) accessories, attachments, tools or parts sold 

or operated with the Product, if they have not been manufactured by MANDAKO; (iii) application or installation of 

accessories, attachments, tools or parts not completed in accordance with MANDAKO’s operator’s manual, 

specifications or printed instructions; (iv) defects or problems caused by misuse, abuse, neglect, improper testing, 

improper storage, improper handling or abnormal conditions; and (v) defects caused by wear and tear from ordinary 

use of the Product. 

 

 

During the one (1) year warranty period, provided that written notice of the Covered Defects is given to MANDAKO 

within seven (7) days from the date that the defect was, or ought to have been, discovered, the liability of MANDAKO 

under this Limited Warranty shall be limited to the repair or replacement of any defective Product. For clarity, the 

purchaser shall be responsible for all expenses incurred as a result of any repairs, labour, parts, transportation or 

any other work, unless MANDAKO has otherwise authorized reimbursement of such expenses. In order to obtain 

repair or replacement, the written notice provided by the purchaser must contain full details of the Covered Defects 

and submitted online at 

www.mandako.com/warranty-claim

 or be sent to: 

 

Mandako 

Box 379, 12159B, Hwy 306 

Plum Coulee, Manitoba, R0G 1R0 

 

MANDAKO reserves the right to inspect the defective Product prior to  repair or  replacement. If MANDAKO 

determines that a defect in the Product is not a Covered Defect, it shall not have any obligation to repair or replace 

the Product.  

 

No one is authorized to make oral warranties or representations on behalf of MANDAKO regarding the Product.  

The Product is subject to design changes and MANDAKO shall not be required to retro-fit or exchange items on 

previously sold Product, except at its own option. 

 

THIS LIMITED WARRANTY IS DEEMED ACCEPTED BY YOU UPON YOUR PURCHASE OF THE PRODUCT. 

TO THE EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY IS EXCLUSIVE, AND IN LIEU OF ANY 

AND ALL OTHER WARRANTIES, CONDITIONS OR REPRESENTATIONS RESPECTING THE PRODUCT, 

EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, SUITABILITY, OR 

ANY OTHER WARRANTIES, REPRESENTATIONS OR CONDITIONS THAT MAY ARISE FROM USAGE OF 

TRADE OR COURSE OF DEALING.  

 

MANDAKO’S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN 

ABOVE AND  IN NO EVENT SHALL MANDAKO OR ITS SUPPLIERS, AGENTS, OFFICERS, DIRECTORS, 

CONTRACTORS AND EMPLOYEES BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY FOR ANY 

INDIRECT, PUNITIVE, EXEMPLARY, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSSES 

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS OR SALES, 

BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF GOODWILL, WORK 

STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OR ANY OTHER PECUNIARY LOSS OR 

COMMERCIAL DAMAGE OR LOSS) ARISING FROM ANY CLAIM WHATSOEVER, INCLUDING ANY TORT, 

EQUITY, NEGLIGENCE, GROSS NEGLIGENCE, WILFUL MISCONDUCT OR STRICT LIABILITY CLAIM, EVEN 

IF MANDAKO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES OR THEY ARE 

FORESEEABLE.   THE PURCHASER WAIVES ANY CLAIM AGAINST MANDAKO FOR PUNITIVE OR 

EXEMPLARY DAMAGES.  

 

WARRANTY VOID IF NOT REGISTERED 

PLEASE REGISTER AT 

www.mandako.com/registration

 

 

Содержание REDDI-ARM 10 Series






















































Отзывы: