Man E0834 LE302 Скачать руководство пользователя страница 40

Страница: 40 / 90

Transport, Packaging and Storage

Carefully read the Operating Instructions before starting any work!

This is especially valid for the chapter on General Safety Instructions

and the safety instructions in each of the chapters.

5.3

Transport Inspection

Check the delivery for missing items and for damage from transport.

If external signs of transport damage are apparent:

Do not accept delivery or only accept under written protest.

List scope of damage on the transport documents or on the transportation company's packaging slip.

Initiate a claims process.

Get engine checked by an expert before it is placed into commission.

NOTE!

Make sure to claim each damage case as soon as it is discovered. Damage claims can only
be claimed within the applicable time limits.

Содержание E0834 LE302



























































































Результаты поиска

Содержание E0834 LE302

Отзывы:

Похожие инструкции для E0834 LE302

Бренды по названию

Популярные бренды

Man E0834 LE302, Руководство по эксплуатации

Результаты поиска

Содержание E0834 LE302

Отзывы:

Похожие инструкции для E0834 LE302

Бренды по названию

Популярные бренды