manualshive.com logo in svg

Man B&W S50MC-C8-TII, Руководство по проекту, Страница: 353 / 403

Поделиться
Скачать
Man B&W S50MC-C8-TII Скачать руководство пользователя страница 353

MAN B&W 

19.02

Page 1 of 1

MAN Diesel

MAN B&W MC/MCC, ME/ME-B/MEC/MEGI engines

198 45 169.3

Note:

  All paints are to be of good quality. Paints according to builder‘s standard may be used provided they at least 

fulfil the  above requirements.

 

The data stated are only to be considered as guidelines. Preparation, number of coats, film thickness per coat, 
etc. have to be in accordance with the paint manufacturer’s specifications.

178 30 207.4

Specification for painting of main engine

Fig. 19.02.01: Painting of main engine: option 4 81 101, 4 81 102 or 4 81 103

Components to be painted before 

shipment from workshop

Type of paint

No. of coats/

Total dry film 

thickness 

µ

m

Colour:

RAL 840HR

DIN 6164

MUNSELL

Component/surfaces, inside engine, 

exposed to oil and air

1. Unmachined surfaces all over. However 

cast  type crankthrows, main bearing cap, 

crosshead bearing cap, crankpin bearing 

cap, pipes inside crankcase and chainwheel 

need not to be painted but the cast surface 

must be cleaned of sand and scales and 

kept free of rust.

Engine alkyd primer, weather 

resistant

2/80

Free

Oil and acid resistant alkyd paint.

Temperature resistant to mini-

mum 80 °C.

1/30

White:

RAL 9010

DIN N:0:0.5

MUNSELL N9.5

Components, outside engine

2. Engine body, pipes, gallery, brackets etc.

Delivery standard is in a primed and finally 

painted condition, unless otherwise stated 

in the contract.

Engine alkyd primer, weather 

resistant.

2/80

Free

Final alkyd paint resistant to salt 

water and oil, option: 4 81 103.

1/30

Light green:

RAL 6019

DIN 23:2:2

MUNSELL10GY 8/4

Heat affected components:

3. Supports for exhaust receiver
Scavenge airpipe outside.
Air cooler housing inside and outside.

Paint, heat resistant to minimum 
200 °C.

2/60

Alu:

RAL 9006

DIN N:0:2

MUNSELL N7.5

Components affected by water and 

cleaning agents

4. Scavenge air cooler box inside.

protection of the components 

exposed to moderately to 

severely corrosive environment 

and abrasion.

2/75

Free

5. Gallery plates topside.

Engine alkyd primer, weather 

resistant.

2/80

Free

6. Purchased equipment and instruments

painted in makers colour are acceptable

unless otherwise stated in the contract.

Tools

Unmachined surfaces all over on handtools 

and lifting tools.

Purchased equipment painted in makers 

colour is acceptable, unless otherwise 

stated in the contract/drawing.

Oil resistant paint.

2/60

Orange red:

RAL 2004

DIN:6:7:2

MUNSELL N7.5r 6/12

Tool panels

Oil resistant paint.

2/60

Light grey:

RAL 7038

DIN:24:1:2

MUNSELL N7.5

Содержание B&W S50MC-C8-TII




















































































































































































































































































































































































































Отзывы:

Нет отзывов