1
(800) 858-5374 | www.mammothome.com
The Mammoth UV Air Sanitizer delivers 2 x 9 watts (or 18 watts)
of sanitizing UV power to the HVAC units that circulates air
throughout the home.
The ballast and lamp is powered a 24V power supply that plugs directly to the 110V to
240V outlet. Because this device utilizes 24V low voltage power, you no longer have to
worry about risk of shock, fire or code compliance.
This also makes the operation and installation very safe and affordable. In most
circumstances, user can install the device direcly with a few tools. However, we always
suggest user to allow professional installer to install the product without causing any
damage to any other parts of the HVAC system.
The Mammoth Air Sanitizer can be installed from the exterior of HVAC system. To install,
affix the installation instructions and guide at the intended site, drill two holes and mount
the fixture and plug it to a suitable wall outlet.
Fixture is meant to operate continuously to avoid growth of mold and bacteria, etc.
under optimum conditions even when A/C-Heating unit itself is off.
APPLICATION
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service, maintenance, or use can cause
fire, electrical shock, or other conditions which may cause personal injury or property
damage. If you have questions or difficulty in installation please consult with a licensed
electrician or contractor.
Follow all safety codes, wear safety glasses and work gloves. Read all instructions
thoroughly before installation and operation of the unit.
WARNING
Before installing or servicing this unit, turn off all power to both the
heating/air conditioning unit. Do not plug in the power adaptor to the
wall outlet until the Mammoth UV Air Sanitizer is fully installed.
Never expose eyes directly to UV. Read all materials before starting.
