Mammoth M.DC.T.AGB.20.1000, Руководство пользователя, Страница: 18 / 21

c) Tilt the grinder at a 10° to 15° angle for easy handing and smooth grinding.
d) Apply the grinding disc to the work surface with a light, steady pressure for
maximum grinding efficiency. It should never be necessary to force the tool.
The weight of the tool applies adequate pressure.
e) The grinding discs are more moderate metal excessive pressure on the
grinding disc. Excessive or sudden pressure will overload the motor, slow the
grinding action, put dangerous stress on the disc and causes breakage.
Note: The continued use of a worn-out disc may result in disc explosion and serious
injury.
3 Cutting-off
WARNING! Always use the closed guard for twist, cutting-off operation for
metal.
• While cutting-off,do not press the tool, do not twist, do not turn.
twist, do not turn.
• Enter with grinding wheel at a 90 ° angle in theworkpiece.
• Work with moderate, the material to be machined custom feed.
• Do not stop the wheel with lateral pressure
• Expiring not brake discs with side pressure.
• The direction in which the abrasive cutting is performed is important.
• The machine must always opposite to the rotational direction of the cutting
wheel to be moved. Therefore, never move the machine in the other
direction! There is a danger that it could be pushed out of the uncontrolled
intersection.
TECHNICAL DATA
BRUSHLESS ANGLE GRINDER
WARNING! This machine produces an electromagnetic field during operation. This
filed
may under some circumstances interfere with active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend persons with medical
implants to consult their physician and the medical implant manufacturer before
operating this machine.
Always remove the battery from machine before doing any work on the Angle
Grinder!
CLEANING AND MAINTENANCE
1 Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust
as far as possible. Wipe the equipment with a clean cloth or blow it with
compressed air at low pressure.
• We recommend that you clean the device
• Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
EN
18
Rechargeable
battery
No-load speed Disc Diameter
20V Li-ion 10000 MIN
-1
125mm
Battery charging
voltage
Battery charging
current
Mains voltage
for charger
Charging time Weight
21 V DC
2400mA
220-240V~AC
50-60Hz
For 2.0Ah: 50 min
For 4.0Ah: 100 min
1.4kg