Mammoth M.DC.T.AGB.20.1000, Руководство пользователя, Страница: 12 / 21

EN
12
SAFETY INSTRUCTIONS AND WARNINGS
The equipment complies with the safety regulations required for electrical equip -
ment. Read through the instructions for use before starting up the equipment.
Improper use can lead to personal injury and property damage. Persons, who are
not familiar with the instructions, may not operate the equipment. Keep the instruc -
tions for use in safe custody.
Children and youths are not permitted to operate the equipment.
USE ACCORDING TO SPECIFICATIONS
• The device is designed for grinding, roughing, and polishing metals, rocks, and
ceramic, allowing for the right accessory. The device is not designed for cutting of
any material!
• The manufacture assumes no liability whatsoever for improper use or if the
machine has been tampered with.
• Give equal attention to the safety instructions, assembly and operating
instructions as well as the common valid accident prevention regulations
GENERAL SAFETY INSTRUCTIONS
WARNING!
Please read all safety notes and instructions. Failure to comply with the safety notes
and instructions can lead to electric shock, fire and/ or serious personal injuries.
Keep all safety notes and instructions for future reference. The term “electric tool”
used in the safety notes refers to powered electric tools (with power cord) and to
cordless electric tools (without power cord).
1) Workplace safety
a) Keep the workplace clean and well lit. Failure or unlit workspaces can lead to
accidents.
b) Do NOT use the power tool in an environment, where there is danger of
explo sion, such as places with flammable liquids, gases or dust. Power tools
produce sparks, which could ignite the dust or vapors.
c) Keep children and other persons away while the power tools are in operation.
In case of distraction, the operator might lose control over the tool.
2) Electric safety
a) The connector plugs of the electric tool must fit into the power outlet. The
connector may not be modified in any way. Never use adaptor connectors
together with power tools with protective earthing. Unmodified connectors
and suitable power outlets reduce the risk of electric shock.
b) Avoid body contact with earthed surfaces, such as pipes, heaters, hearths
and refrigerators. If your body is grounded, there is an increased risk in case
of electric shock.
c) Keep power tools away from rain and moisture. If water enters a power tool,
there is an increased risk of electric shock.
d) Do NOT misuse the cable to carry or suspend power tools, nor to unplug the
connector from the power outlet. Keep the cable away from heat, oil, sharp
edges or moving parts. Damaged or entangled cables increase the risk of
electric shock.
e) When using a power tool outdoors, only use extension cables which are
suitable for outdoor use. Using an extension cable, which is not suitable for
outdoor use, increases the risk of electric shock.
f) If the usage of the power tool in a wet environment is unavoidable, use a
residual current device (RCD). The use of an RCD reduces the risk of electric
shock.