Solder Jumper Wire Here
If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an
email at [email protected] or give us a call at 405-254-4112.
Wire to Ground Lug of Battery Clip
Wire to Main Ground Lug of Output Jack
Anode (positive side) of LED.
Connect to Hole 1 of D2 on Main PCB.
Cathode (negative side) of LED.
Connect to Hole 2 of D2 on Main PCB
Positvive Wire of Battery Clip
Wire to Main 9v +
Lug of DC Jack
Wire to DC Jack Ground Lug
500kA