Mamas & Papas Book, Инструкция по эксплуатации

Страница: 18 / 20

- 18 -
26• - on the back of the pushchair:
- remove the lining from the seat (fig_f);
- with the help of a screwdriver, remove the elastic from
its groove (fig_g);
- undo the buttons on both sides on the backrest (fig_h);
27• Use the screwdriver to remove the screw in the main
handle, on both sides (fig_i);
- Store the screw after removing it.
- Unthread the strap from the lining (fig_l);
28• Unfasten and remove the shoulder straps from the
backrest as shown in the figure 16_a / 16_b;
- push in the openings and pull off the side lining.
Do this on both sides (fig_m);
- remove the lining from above (fig_n).
REPLACING THE LINING: to put the lining back on:
- fit the lining onto the backrest
- fit the lining over the platform
- attach the side elastics (25b)
- fasten the lining's hooks to the armrests (26d)
- fasten the lining's buttons to the chassis and lower the
velcro straps (26e)
- fasten the belt in the right position with the screwdriver
(26c)
- attach the leg divider under the seat. One part must be
above the seat and one below (25a)
- attach the belt at the desired height (point 16)
29• on the back of the stroller:
- insert the two rigid flaps between the tube and the seat
(fig_a);
- thread the strap through the lining's eyelet. Replace the
main handle's screw (fig_b).
WARNING: stretch the strap to check it is securely
fastened.
- Button the lining onto the stroller's backrest (27h).
30• Insert the lining's elastic into the groove and stretch it
from inside to fasten it (fig_c).
Insert the rigid strap into its grooves until it clicks into
place. Check it is securely fastened by pulling it (fig_d).
SUREFIX SYSTEM
The Mamas & Papas Surefix System is the quick practical
system that enables you to attach the Primo Viaggio Tri-
Fix car seat to the stroller in just one step.
31• Before attaching the car seat, you must:
- insert the stroller's break;
- put the backrest into the lowest position (flat, fig_a);
- lift the flaps, release them from the velcro fastening and
put the together (fig_b);
- lift the Mamas & Papas Surefix attachments from the
chassis (fig_c);
- put the car seat in mum-facing position and push it
down until it clicks (fig_d);
- Check that the child transport system is properly
fastened.
- Lift the stroller backrest to the highest position.
- Important: do not remove the bumper bar from the
stroller when you attach the car seat (read point 20 to
see how to attach the bumper bar).
- To release the car seat, read the car seat's instruction
manual.
32• To lower the stroller's Mamas & Papas Surefix fittings,
move them inwards and rotate them downwards.
SERIAL NUMBERS
33• The information on the BOOK stroller is under the seat
and includes: product name, production date and item
serial number.
This information is required if complaints are made.
ACCESSORIES
34• RAIN CANOPY: can be fastened to the hood.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this product
in a dry place.The maintenance have to be regularly.
CLEANING THE CHASSIS: periodically clean all plastic parts
with a damp cloth. Do not use solvent or similar cleaning
products; keep all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms, locking
mechanisms, wheels, ...) and free of dust and sand and, if
necessary, lubricate with light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove
dust and wash by hand at a maximum temperature of
30°C; do not wring; do not use chlorine bleach, do not
iron; do not dry clean; do not apply solvent-based stain
removers and do not dry in a tumble dryer.
/mamasandpapasuk
@mamasandpapas
/user/mamasandpapasglobal