Step 7a
Slot the drop-side catches
(F8) onto the narrow ends of
the top guides (F9).
Step 7b
Slot the ends of the drop-
side rods into the holes in the
underside of the top guides.
Please note;
the drop-side
catch marked
Left
goes on
the left side and the catch
marked
Right
goes on the
right side.
Step 7c
Slot two short assembly
screws (F2) through the top
holes in the cot ends. Tighten
the screws into the threaded
holes in the thinner ends of
the top guides.
IMPORTANT:
Before placing
your child in the cot ensure
that all screws and fittings
are fully tightened,
particularly the base bracket
nuts.
FITTINGS
F9 / Top
guides x 2
F8
F2
F9
F8 / Drop-side catches x 2
Step 7a
Step 7c
Step 7b
F2 /
Short assembly screws x 2
– 7 –
