Maintenance
Chapter 5
Zetasizer APS Basic Guide
Page 5-21
Warning!
This product must be connected to a protective earth
Make all computer connections (mouse, keyboard, power, etc) by following
the instructions provided with your computer.
Rinse fluid: connect a bottle containing solvent to the black port on the side of
the instrument. Connect a bottle containing a wash fluid to the red port on the
side of the instrument.
Place a beaker below the waste outlet.
Installation options
If purge air is required connect to the purge air port at the base of the rear panel
. Refer to the specification in
Appendix A
.
If using the optional Plate Temperature Control unit, connect to input
.
Changing the computer
If, at some point in the future, the computer used with the instrument is changed,
the following actions will be required.
To install the system:
1.
Insert the
Zetasizer Software
CD into the CD drive.
2.
If
Autorun
is enabled on the computer, the software will start to install auto-
matically. Follow all on-screen instructions to complete the installation.
3.
If Autorun is not enabled, browse to the CD drive using Windows Explorer
and double click on the file named Malvern Zetasizer Software...exe. Note: this
file name changes with the version number of the software released.
Note
If the software is subsequently updated with a new version, any custom
reports, parameter settings, SOPs, etc. will be preserved.
MAN0494-1 (Zetasizer APS Basic Guide).book Page 21 Friday, August 9, 2013 2:08 PM
