Malsch IMPULSE KL, Инструкция по эксплуатации

Страница: 49 / 64

| 49
5. Visual inspection of mains connection cable
Observe the following points with regard to the mains connec-
tion cable:
§
Visually inspect and check the function of the strain
relief and kink protection
§
Visually inspect insulation parts
§
Visually inspect connection cables
(damage, crushing)
§
Visually inspect mains connection plug
§ Visually inspect cable hooks
6. Visual inspection of wiring
Check the following points:
§
Damage to the cables
§
Correct cable routing
§ Proper seating of plug connections and pull-out pro-
tection
7. Visual inspection of housing
Check the housings for external damage and intact seals.
8. Battery replacement
Replace the battery in line with specifications at least every
two years or after every case of emergency lowering.
9. Measurements in line with BS EN 62353
Check the electrical components of the hospital bed as specified
in BS EN 62353. Measure the leakage current with the help of
the equivalent leakage current test. The maximum permissible
value is ≤ 500 µA.
10. Visual inspection of grip handle for trapeze bar
Check that the plastic components and straps show no signs of
damage. The grip handles must be replaced every five years.
Battery replacement
The 9 V block battery / batteries must be replaced at two-year
intervals and after every actuation of the electrical emergency
lowering function in order to guarantee the functional capability
of emergency lowering. Only use branded batteries and please
dispose of old batteries in an environmentally friendly manner.
The two 9 V block batteries are
located in the motor control unit
housing below the mounting
panel. The pull-out slots are se-
cured with a screw which must
be removed beforehand.