Malsch Homecare, Инструкция по эксплуатации

Страница: 25 / 32

| 25
Hand controller holder
The additional hand controller holder allows you to place the
hand controller within reach of the occupant.
Caution! The hand controller holder is flexible
and must not be used as an aid to standing up
or as a handle.
Mattresses
Betten Malsch GmbH offers a selection of individually made
special mattresses that meet a wide range of applications
and demands with regard to the reclining surface contours of
care beds. Please ask your specialist retailer or the manufac-
turer about the right mattress for your requirements.
Caution! Only use mattresses tested and au-
thorised by Betten Malsch GmbH.
For safety reasons, a minimum protective
height of 220 mm should be maintained be-
tween the upper edge of the mattress and the
upper edge of the side rail. This protective
height is directly related to the height of the
mattress.
Side rail height extension/
triple side rail
To guard against pressure sores and to accommodate oc-
cupants with hip or spine injuries, you can use various alter-
nating pressure systems and underlays. If this results in the
mattress depth increasing to more than 16 cm, Betten Malsch
GmbH offers a flexible side rail height extension or the use
of a triple side rail.
Caution! Only use original bed accessories
from Betten Malsch GmbH. Side rail height
extensions and the use of the triple side rail
are aligned and approved according to re-
quired DIN standards and Betten Malsch care
beds.