Malmet Bedpan / Urinal Bottle Washer Disinfector (ES-D)
Detergent Model with Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 5
Page
7
June 23
Detergent Out Condition - F 30 Fault
If insufficient detergent is available to deliver the required quantity, the device will display an F30 dEt fault. Access to the
load will be restricted until the condition is rectified.
To rectify this fault, install a new detergent bottle as per the procedure in this manual
“Changing the
Detergent
Bottle”.
On completion of changing the detergent bottle, press either the “Manual Door” or “Manual
Start” button
to initiate a
priming sequence. If priming is successfully the fault will clear and door will open. Inspect the items, ensuring they have
been cleaned sufficiently before unloading. It is recommended the items are reprocessed in the event of an F30 dEt Fault.
If priming is unsuccessful, access to the load will continue to be restricted and F 30 dEt fault displayed.
.
To avoid the detergent out condition, check the low-
level mark on detergent door, replace detergent when
the detergent level reaches this mark
