Malmet Bedpan / Urinal Bottle Washer Disinfector (ES-D)
Detergent Model with Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 5
Page
13
June 23
FREE STANDING
‘S’ TRAP PIPE POSITIONING
FREE STANDING
‘P’ TRAP PIPE POSITIONING
The centre of the soil line to receive the ‘S’ Trap
should be approximately 272mm from the back wall.
To allow for normal recommended minimum service
access, space soil line 600/700mm from side wall.
If space restrictions do not allow for recommended
side service access, Malmet suggest preference be
given to providing the most space available on the
right-hand side as you look at the front of the device.
This will ease any difficulty in servicing the steam tank
element and probe.
The centre of the soil line to receive the ‘P’ Trap
should be approximately 410mm from the floor
when the device is positioned 150mm from the wall.
Because this pipe is graded to 5° this measurement
will vary as the device is installed closer or further
away from the back wall.
•
There is no high temperature water discharge from device so no special high temperature pipe work is necessary. Soil
line must comply to AS/NZS 3500.2
•
Soil line connection is by a pan collar or other preferred method. If the belled end on the polyethylene moulded trap is
not required it can easily be cut off to provide a straight pipe connection.
•
Level the device by using the flanged screw in legs and, if possible, maintain approx. 100mm floor clearance for ease of
floor cleaning. Malmet recommends affixing some of the leg flanges to the floor via stainless self-tapping screws to
prevent sideways movements and damage to services and soil line connections.
•
The soil line should protrude from the floor or wall at a minimum of 100mm.
2.4
Venting
No external vent pipework is required as the device is designed to condensate all visible steam within the device.
