Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 21
Page 15
14 September 2017
12.
Rinse pump comes on for 10 seconds to rinse detergent from items
The display shows rins
13.
Once the wash cycle is complete the display will flash 90 (indicating 90°C). This is the critical
temperature that must be reached before the disinfection cycle can commence. At this point the fill
solenoid is disabled and will not operate unit Step 12.
14.
The elements in the steam generator heat to produce steam, which is directed into the wash chamber
raising the internal cabinet temperature above 90°C.
15.
Once the internal cabinet temperature has reached 90°C the disinfection cycle will commence.
This
display shows the actual cabinet temperature
.
16.
All 3 elements on 20amp models and all 2 elements on 10amp models will continue to heat during the
disinfection cycle until the internal cabinet temperature reaches 91°C.
17.
At 91°C one element will turn off and at 92°C another element will turn off, on 20amp models, on
10amp models at 91°C one element will turn off. One element will remain on until 15 seconds before
the end of the cycle. If the internal cabinet temperature falls below 92°C the second element is
turned back on the third respectively if the cabinet temperature falls below 91°C.
ACTUAL
CABINET TEMP.
