Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 21
Page 13
14 September 2017
6.
Once the machine is “loaded” the operator breaks the infra
-red beam to close the door.
The display shows Shut
7.
When the door is fully closed 2 GREEN
LED’s will flash in the infra
-red sensor area for 8 seconds to
advise the user to break the beam again to start a cycle.
The display shows rdY
If the 8 seconds has elapsed the flashing LED
’s
will stop and the unit will not start for a cycle. The
operator has to repeat the process from Step 5 (or press manual start).
Note:
If this occurs the beam must be broken twice.
Note: On 10A models if the steam generator temperature is not at 90°C after the beam has been
broken or the manual start button pressed. The display will show
“CYCL”,
the green LED
’s
will stop flashing and stay on. When the steam generator had reached temperature the
display will show rinS the wash cycle will start automatically.
8.
Once a cycle has been initiated the elements are turned on in the steam tank to start heating the
water.
The wash pump is turned on for 10 seconds
for the initial wash.
The display shows rinS
