26
CHARGING THE BATTERY
1. Hold the battery
9
from underneath, press on the locking clips
8
and pull the battery
backwards.
2. Insert battery
9
into the charger
10
.
3. Plug the transformer into a standard 220/230V wall socket.
•
The 2 LEDs on the battery
9
show the battery charge level while it is charging.
•
The red light means that the battery is charging.
•
The green light means that the battery is fully charged.
•
Do not leave the charger plugged in for more than 24 hours.
4. To reinstall the battery
9
, slide it in from behind the multi-function tool until it clicks
into place.
Batteries are sensitive to impact. Handle with care.
Note:
•
Your multi-function tool is initially provided without any charge in the battery. Give it a
full charge for 1 hours before using it for the first time.
•
After the initial charge, subsequent charges should be a maximum of 1 hours.
•
The battery will reach its optimal charge level after 5 full charging and discharging
cycles.
•
It is normal that the battery emits a small noise and becomes slightly warm during
charging.
•
Do not charge the battery if the ambient temperature is less than 0°C or greater than
50°C.
