Malloca MI 593W, Инструкция по эксплуатации

Страница: 11 / 20

11
Installer’s Instructions
Installation
These Instructions are for the qualified technician, as a guide to installation, adjustment and maintenance,
according to the laws and standards in force. These operations must always be carried out when the
appliance has been disconnected from the electric system.
Positioning (Fig. 4, 5 and 6)
1. Front view
2. Front side
The fixture is especially designed for fitting into a work-top as shown in the corresponding figure.
Place the supplied sealing agent along the hob perimeter.
Do not install the hob over an oven; in case you do, make sure of the following:
-
the oven is equipped with an appropriate cooling system
-
there is no warm-air leakage from the oven towards the hob
-
Suitable air-inlets are provided as shown in the figure.
Electrical connection (Fig. 7)
Prior to carrying out the electrical connection, please ensure that:
The plant characteristics are such as to follow what is indicated on the matrix plate placed at the bottom
of the working area;
That the plant is fitted with an efficient earth connection, following the standards and law provisions in
force.
The earth connection is compulsory in terms of the law.
Should there be no cable and/or plug on the equipment, use suitable absorption material for the working
temperature as well, as indicated on the matrix plate. Under no circumstance must the cable reach a
temperature above 50°C of the ambient temperature.