Malloca MI 593W, Инструкция по эксплуатации

Страница: 7 / 20

7
To avoid all risk, if the power cable becomes damaged, it must only be replaced by the manufacturer,
by an authorized service center, or by a qualified electrician.
Operating principle (Fig.1)
It exploits the eletromagnetic properties of most cooking vessels.
The coil (inductor) which produces the eletromagnetic field is operated and controlled by the electronic
circuit.
The heat is transmitted to food by the cooking vessel itself. The cooking process takes place as described
below.
Loss of heat is minimum (high efficiency)
The system stops automatically when the vessel is removed or even just lifted from the hob.
The electronic circuit guarantees maximum flexibility and fine adjustments.
1. Vessel
2. Induced current
3. Magnetic field
4. Inductor
5. Electronic circuit
6.
Power supply
User’s Instructions Installation
All operations relative to installation (electric connection) should be carried out by skilled personnel in
conformity with the rules in force.
As for the specific instructions see part pertaining to ins- taller.
Use Touch control (Fig.2)
1. ON/OFF
2. Down –
3. Up +
4. Power level display
5. Timed zone indicator LED
6. Timer display
7. Down - timer.
8. Up + timer.
9. Safety lock
10. Safety lock indicator LED
Switching the Touch Control ON/OFF “Z”
After mains voltage is applied the control initializes for approx. 1 second before it is ready for
operation.
After a reset all displays and LEDs glow for approx. 1 second. When this time is over all displays and
LEDs extinguish and the control is in the stand-by mode. Safety lock is activated and the safety lock
indicator LED is illuminated (11).
Before turning on the hob and operating the controls, press the safety lock button (10) for two seconds
to unlock the keypad for normal operation.
Press the ON/OFF (1) button to switch the touch control on. The cooking zone displays show a static
“0”.
If a cooking zone is in the “hot” status, the display shows a static “H” instead of “0”.
After switching-ON the electronic control remains activated for 10 seconds. If no cooking zone or timer
selection follows within this period of time, the electronic control automatically switches back into the