Malloca MH-20I, Инструкции по эксплуатации и монтажу

Страница: 45 / 72

45
An induction coil is located under each heater. When a heater is switched on, this
heats it up. The heater itself is heated indirectly by the heat given off by the pan.
Induction heaters only work when a magnetic based pan is placed on it (see
“Cookware”).
Induction automatically recognizes the size of the pan, i.e. heat is only generated
in the area covered by the base of the pan.
The heater will not work:
~ If it is switched on without a pan in place, or if the pan is unsuitable (non-
magnetic base).
~ If the diameter of the pan is too small.
~ If the pan is taken off the heater when it is switched on.
last selected power level selected.
If a suitable pan is placed on the heater the “u” will go out and you can continue
cooking as normal.
If no pan or an unsuitable pan is placed on the heater, the heater and the hob will
switch off automatically after 1 minutes.
Be careful not to place cutlery or other metal objects on the hob. When the hob
is switched on, or when there is residual heat present, there is the risk of metal
objects heating up quickly. Beware of burns.
Depending on the material, other objects left on the hob could also melt or catch
How induction works