Malloca MH-20I, Инструкции по эксплуатации и монтажу, Страница: 13 / 72

13
Appliance errors are the errors which generate the deactivation of the whole
hob.
When an appliance error is detected, all heaters are switched off, a beep
sounds (only if one or more heaters are active) and all displays show a ‘F’ letter
and the error code alternately.
While in error status all the heater keys are not operative .
Except EEPROM and microcontroller errors, all errors are recoverable. That is,
when the cause of the error disappears all displays are deactivated and the hob
returns to normal operation.
Appliance errors
Error
(Visualization Priority Order)
Error recovery Action
All Heater Dis-
plays
(fore 0.5 sec./ back
0.5 sec)
Microcontroller fault ------- App. off F0
On/Off key emitter fault When the fault disappears App. off FA
On/Off key receiver fault When the fault disappears App. off FC
User interface temperature
sensor short-circuit
When the fault disappears App. off FE
User interface temperature
sensor open-circuit
When the fault disappears App. off Ft
User interface overtempera-
ture
When user interface
temperature < 90ºC
App. off Fc
EEPROM fault ------- App. off FH
Microcontroller A/D converter
multiplexer fault
When the fault disappears App. off FJ
Ambient Light fault When satisfactory ambi-
ent lighting is detected App. off FL
Microcontroller A/D converter
conversion fault
When the fault disappears App. off FU
Appliance errors