Signature User Manual
March 23, 2014
Signature User Manual
Page 24
Using “Signature Application Software”
This is a simple program that allows me to control the RED LED version of the Signature camera
from my computer using a USB to RS485 Cable (see: “
Hooking up Hardware
”
in Chapter 1 of
this manual).
Before Starting the Software
Use the back buttons on the Signature and go into the second
Special Function Menu
and set
the COMM ID to 001. This is required as the Default 000 Signature setting disables the
Communications.
Starting the Software
When the Signature camera is powered
up and your video software is running
(so you have a wonderful image of
something in your display, for me it is
always corn in the farmer’s field).
Double click on application:
Signature Control.exe
(Remember Norton, or whatever
security software you use, might
not like the software. So, if
prompted, tell Norton that the
software is OK, Norton deleted
the software on my computer
first then asked if it was Ok, then
brought it back out of
Quarantine)
The following image should appear on
the screen.
The Signature will remember this new COMM ID the next time you start the camera.
Only when you do a Factory reset, does the Signature revert back to COMM ID 000.
