
22
III Maintenance and After-Sales Service
III-1 Storage and Maintenance
Pay attention to the following points when storing the memory unit.
●
Turn OFF the switch when storing.
●
Do not store the memory unit at a location subject to high temperature or high humidity.
III-2 Temperature calibration and periodical inspection
To ensure correct measurement, it is necessary that each function of this equipment works normally, and
the original high performance is maintained. Periodical performance check and calibration are
essential for maintaining the reliability and performance of the equipment for a long time.
This equipment should be checked each year for ensuring correct and accurate measurement.
It is also necessary to replace the lithium polymer battery every one and half year.
For the temperature calibration, please contact our distributor or us.
III-3 Repair
This equipment has been built using highly-selected electronic parts and mechanical parts, and
calibrated by accurate measuring instruments. If any fault that may hinder the original functions should
occur, please ask repair to the specified distributor or directly to us.
The guarantee period of this equipment is one year from the date of purchasing. After expiration of the
guarantee period, repair will be non-free.
III-4
Clock Setting and Battery Replacement
Note:
There is a clock function inside RCX-S memory unit, supplied date and time during temperature
measurement.
Even if you remove the battery, the electrical charge accumulated inside back up for about 30
sec. Afterwards the clock is initialized.
When the battery change, there are two ways that do not derail the clock.
(1)
Connecting a USB cable
Replace the batteries while connecting a USB cable.
(2)
Changing batteries quickly
Even if you remove the battery, the electrical charge accumulated inside back up for about 30
sec.
Changing batteries quickly.