
20
II-7 Summary (Operating procedure flowchart)
A : Preparation
* When pressing the power switch for more than 2 sec., the memory unit will turn off.
If you do not operate more than 5 minutes, except when the memory unit is connected to USB or
while measurement, it will automatically turn off.
Even if the power turns off, the measurement data will keep until the memory is reset.
The measurement data can be taken into PC by turning on and connection to PC.
Start Measurement preparation
Connection to PC
Red(lights up/blink)
Recharge memory unit
Cool down memory unit
Press power switch
for a little longer (turn off)
Ref : Power ON - Monitor LED
Red(lights up/blink) : Cooling required
Except red : Cooling finished
Ref :Battery LED
Red :while recharging
Lights out :Recharging finished
Monitor LED
Yellow (lights up)
Press power switch
for a little longer (turn off)
Release PC connection
Measurement preparation finished