Malaguti SPIDER MAX GT 500, Руководство по обслуживанию, Страница: 47 / 104

47 07/06
SPIDER MAX 500 - EURO 3
E
F. 17
F. 14
F. 15
F. 16
• Release the nut (D - F. 11).
• Remove the floating support (S) from the calliper body,
including the two slide pins.
During reassembly, lubricate the slide pins must
rubber gasket grease.
• Check the dust seals (P - P1) for wear. In case of signs
of (even light) wear or damage, replace them.
• Open by means of a screwdriver (or any other similar
tool), the bracket (B) fins (A). Remember to wear safety
gloves.
• Release the screws (V2).
• Remove the plate (C).
After refitting the plate (C) and the bracket and
tightening the screws (V2) to the specified
torque, lean the fins (A) as before (Please refer:
F. 11).
• Blow with a small compressed air flow to extract the two
pistons from the calliper body.
An excessive pressure may cause the two
pistons (E) to jump off violently.
S
C
B
A
P
1
P
A
V
2
E
E
V
2
20 ± 20%