Malaguti SPIDER MAX GT 500, Руководство по обслуживанию, Страница: 43 / 104

43 07/06
SPIDER MAX 500 - EURO 3
ODOMETER SPROCKET
• Release the screw (V) and extract the odometer
sprocket (A).
(RIGHT AND LEFT) FRONT BRAKE CALLIPERS
• Release the screws (V2) and release the
entire callipers.
WHEEL SPINDLE
• Slacken the screw (V1) from the wheel spindle clamp.
• Release the wheel spindle (B) and extract it, taking care
not to damage spacer (C) and the spacer (B1 - F.4).
F. 1
MECHANICAL
COMPONENTS
E
FRONT WHEEL
REMOVAL
Before removing the front wheel, check for the perfect stability of the motorcycle. If necessary, place an
suitable support under the engine.
NOTE - In order to remove the front wheel, it is necessary to release the odometer sprocket transmission and the brake
callipers.
F. 2
(FRONT BRAKE) DISCS
• To separate the discs (D) from the front
wheel, release and remove the screws
(V6) and the washers (E).
V
2
30 ± 20%
A
V
V
2
V
2
B
V
1
V
6
E
F. 3
Check the discs (D) for wear and
replace if necessary (service limit 4.5
mm). In case of abnormal wear or signs
of scoring, carry out grinding.
D
When reassembling the (right and left brake)
discs observe disc rotation direction, which
can be determined by the position of the
slots (Please refer: F. 32 - P.52).
V
6
11 ± 10%
V
6
E
D