4
INSTALLATION / ASSEMBLY
1) For packaging reasons, the machine is not completely
assembled. Remove the product and all components from the
machine
3) Fix the casters in the appropriate place using a No. 10 spanner.
Fig.01 -
Machine in plastic packaging
2) The wheels and supports are housed inside the machine body
(drawer). If you notice that your machine is missing a component,
do not operate the machine and contact your supplier directly.
Fig.02 -
Drawer with components
Fig.03 -
Components
Fig.04 -
Fix the casters
4) Lift the legs of the table, starting from the side on which the
casters were fixed.
Fig.05 -
Raised legs
Fig.06 -
Attached casters and raised legs
5) Lift the remaining legs and leave the table standing.
Fig.07 -
Standing Table
