3
assembly and any other condition that may affect its operation. A
protector or other part that is damaged must be repaired or
replaced immediately. Do not use the machine if the switch does
not turn it on or off.
CAUTION:
Failure to heed these warnings could result in
personal injury and serious damage to the machine.
•
Do not operate this machine until it is assembled and installed
according to the instructions.
3)
Personal Safety
•
Be aware and look what you are doing.
o
Common sense when operating a tool. Do not use the tool
when you are tired or under the influence of drugs, alcohol or
medication. Lack of attention while operating a tool can result in
serious personal injury.
•
Always wear safety glasses. Use a face mask, non-slip safety
shoes, gloves and ear protection to reduce personal injuries.
•
Use suitable equipment. Do not wear loose clothing, gloves,
chains, rings, bracelets or other accessories that could get caught
in moving parts. Non-slip shoes are recommended. Wear hair
protection to secure it.
•
Do not overreach. Keep your balance and your feet in a
comfortable position at all times.
•
Disconnect tools before servicing or changing accessories, such
as blades, tips, cutters, etc.
•
Reduce the risk of unintentional starting. Make sure the switch
is off before connecting the wire to the plug.
•
Use recommended accessories. Refer to the instruction manual
to check the recommended accessories. Improper use of
accessories can cause a risk of accident for people.
•
Never step on the machine. A serious accident can occur if the
tool is tilted or if the tool is touched accidentally.
4) MACHINE USE AND CARE
•
Do not force the machine. It will do the job better and safer for
the intended use.
•
Use the correct machine. Do not force the machine when doing
work for which it was not designed.
•
Check for damaged parts before continuing using the machine,
a protection or other part that is damaged must be carefully
examined to determine its proper functioning and perform its
function properly. Check the alignment of moving parts, breakage
of parts,
ALWAYS USE PROPER PROTECTIVE
EQUIPMENT WHEN OPERATING THIS
EQUIPMENT.
ADDITIONAL SAFETY RULES FOR THE
WORKBENCH
The MA.1000 Support Table is perfect for your workshop. It is is
made of MDF with a work area of 1,000 x 420 mm. Its
structure is made of stiffened sheet and supports up to 200 kg. It
contains a drawer for the professional to store all the accessories
of his projects. In addition, it has 2 plugs and a 2,000 mm
electrical extension. It has retractable legs and wheels for
movement, allowing the professional to take the MA.1000
wherever he wants.
Technical characteristics:
Working area: 1,000 x 420 mm
Load Capacity: 200 kg
Weight: 23.6 kg
FUNCTIONAL DESCRIPTION
The machine is packaged in a sturdy cardboard package.
TRANSPORT
