MAKSIWA CBC.EC, Инструкция по эксплуатации

Страница: 11 / 18

11
SOLUTION GUIDE
PROBLEM CAUSE SOLUTION
Machine is not turn on
Plug disconnected or connected
improperly.
Check the connection and the voltage
of your power supply.
Main switch off. Turn on the Main switch.
ON switch off. Turn on the ON switch (green).
Emergency switch activated. Rotate clockwise to release.
Circuit breaker off.
Check the voltage of your Power
supply (110V) and turn on the breaker
inside of panel.
The glue is not heating
Temperature Controller unregulated. Adjust the temperature settings.
Burned resistance.
Contact the Maksiwa Service to change
the resistance.
The tape is not gluing
The glue is not at the correct
temperature.
Check the glue temperature
specification.
Missing glue at the glue axis. Complete the glue pot with more glue.
The glue is inadequate to this
equipment.
Check the directions about glue brands
in this manual.
The thickness of the glue is incorrect.
Adjust the thickness of the glue (check
this manual).
The glue axis is out of bracket (square).
Adjust the bracket of the glue axis
(check this manual).
The edge of the panel is out of square.
Check the square of your panelyou’re
your panel saw.