7 ENGLISH
Lighting up the front lamp
1
Ź
1.
Lamp
CAUTION:
Do not look in the light or see the
source of light directly.
Pull the switch trigger to light up the lamp. The lamp keeps on
lighting while the switch trigger is being pulled. The lamp goes
RXWDSSUR[LPDWHO\VHFRQGVDIWHUUHOHDVLQJWKHVZLWFKWULJJHU
NOTE:
When the tool is overheated, the tool stops auto-
PDWLFDOO\DQGWKHODPSVWDUWVÀDVKLQJ,QWKLVFDVHUHOHDVH
WKHVZLWFKWULJJHU7KHODPSWXUQVRႇLQRQHPLQXWH
NOTE:
8VHDGU\FORWKWRZLSHWKHGLUWRႇWKHOHQVRI
the lamp. Be careful not to scratch the lens of lamp, or
LWPD\ORZHUWKHLOOXPLQDWLRQ
Reversing switch action
1
A
B
Ź
1.
Reversing switch lever
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop.
Changing the direc-
WLRQRIURWDWLRQEHIRUHWKHWRROVWRSVPD\GDPDJHWKHWRRO
CAUTION:
When not operating the tool, always
set the reversing switch lever to the neutral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
Speed change
1
Ź
1.
Speed change lever
CAUTION:
Always set the speed change lever
fully to the correct position.
,I\RXRSHUDWHWKH
WRROZLWKWKHVSHHGFKDQJHOHYHUSRVLWLRQHGKDOIZD\
EHWZHHQWKHVLGHDQGVLGHWKHWRROPD\EH
damaged.
CAUTION:
Do not use the speed change lever
while the tool is running.
7KHWRROPD\EHGDPDJHG
Displayed
Number
Speed
Torque
Applicable
operation
1
Low
High
+HDY\ORDG
-
ing operation
2
High
Low
Light loading
operation
7RFKDQJHWKHVSHHGVZLWFKRႇWKHWRRO¿UVW3XVK
WKHVSHHGFKDQJHOHYHUWRGLVSOD\IRUKLJKVSHHG
or "1" for low speed but high torque. Be sure that the
speed change lever is set to the correct position before
operation.
,IWKHWRROVSHHGLVFRPLQJGRZQH[WUHPHO\GXULQJWKH
RSHUDWLRQZLWKGLVSOD\SXVKWKHOHYHUWRGLVSOD\
and restart the operation.
