6 ENGLISH
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1
2
Ź
1.
Indicator lamps
2.
Check button
3UHVVWKHFKHFNEXWWRQRQWKHEDWWHU\FDUWULGJHWRLQGL
-
FDWHWKHUHPDLQLQJEDWWHU\FDSDFLW\7KHLQGLFDWRUODPSV
light up for a few seconds.
Indicator lamps
Remaining
capacity
Lighted
2ႇ
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
EDWWHU\
7KHEDWWHU\
PD\KDYH
malfunctioned.
NOTE:
Depending on the conditions of use and the
DPELHQWWHPSHUDWXUHWKHLQGLFDWLRQPD\GLႇHUVOLJKWO\
IURPWKHDFWXDOFDSDFLW\
NOTE:
7KH¿UVWIDUOHIWLQGLFDWRUODPSZLOOEOLQNZKHQ
WKHEDWWHU\SURWHFWLRQV\VWHPZRUNV
Tool / battery protection system
7KHWRROLVHTXLSSHGZLWKDWRROEDWWHU\SURWHFWLRQV\V
-
WHP7KLVV\VWHPDXWRPDWLFDOO\FXWVRႇWKHSRZHUWR
H[WHQGWRRODQGEDWWHU\OLIH7KHWRROZLOODXWRPDWLFDOO\
VWRSGXULQJRSHUDWLRQLIWKHWRRORUEDWWHU\LVSODFHG
under one of the following conditions:
Overload protection
7KLVSURWHFWLRQZRUNVZKHQWKHWRROEDWWHU\LVRSHUDWHG
LQDPDQQHUWKDWFDXVHVLWWRGUDZDQDEQRUPDOO\KLJK
FXUUHQW,QWKLVVLWXDWLRQWXUQWKHWRRORႇDQGVWRSWKH
application that caused the tool to become overloaded.
Then turn the tool on to restart.
Overheat protection
This protection works and the lamp blinks when the tool
RUEDWWHU\LVRYHUKHDWHG,QWKLVVLWXDWLRQOHWWKHWRRODQG
EDWWHU\FRROEHIRUHWXUQLQJWKHWRRORQDJDLQ
Overdischarge protection
7KLVSURWHFWLRQZRUNVZKHQWKHUHPDLQLQJEDWWHU\
FDSDFLW\JHWVORZ,QWKLVVLWXDWLRQUHPRYHWKHEDWWHU\
IURPWKHWRRODQGFKDUJHWKHEDWWHU\
Switch action
1
Ź
1.
Switch trigger
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
7RVWDUWWKHWRROVLPSO\SXOOWKHVZLWFKWULJJHU7RRO
VSHHGLVLQFUHDVHGE\LQFUHDVLQJSUHVVXUHRQWKHVZLWFK
trigger. Release the switch trigger to stop.
NOTE:
7KHWRRODXWRPDWLFDOO\VWRSVLI\RXNHHSSXOO
-
ing the switch trigger for about 6 minutes.
Electric brake
This tool is equipped with an electric brake. If the tool
FRQVLVWHQWO\IDLOVWRTXLFNO\VWRSDIWHUWKHVZLWFKWULJJHU
is released, have the tool serviced at a Makita service
center.