Makita UR002GD201, Инструкция по эксплуатации

Страница: 14 / 28

14 ENGLISH
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided. To start the tool,
depress the lock-off lever and pull the switch trigger.
The tool speed increases by increasing pressure on the
switch trigger. Release the switch trigger to stop.
UR002G
1
2
► 1. Lock-off lever 2. Switch trigger
UR003G
2
1
► 1. Lock-off lever 2. Switch trigger
Speed adjusting
You can select the tool speed by tapping the main
power button. Each time you tap the main power button,
the level of speed will change.
2
1
► 1. Speed indicator 2. Main power button
Speed indicator Mode Rotation speed
High 0 - 6,500 min
-1
Medium 0 - 5,300 min
-1
Low 0 - 3,500 min
-1
Automatic Torque Drive Technology
When you turn on the Automatic Torque Drive
Technology (ADT), the tool runs at optimum rotation
speed and torque for the condition of grass being cut.
To start ADT, press and hold the reverse button until the
ADT indicator turns on. After that, tap the main power
button to select the cutting tool attached to the tool.
Light the lamp beside marking to select cutter blade
and plastic blade, marking to select nylon cutting
head.
To stop ADT, press and hold the reverse button until the
ADT indicator turns off.
5 4
1
2
3
► 1. marking 2. marking 3. ADT indicator
4. Main power button 5. Reverse button
Indicator Mode Cutting tool Rotation
speed
ADT
(Cutter blade)
Cutter blade
Plastic blade
3,500 - 6,500
min -1
ADT
(Nylon cutting
head)
Nylon cutting
head
3,500 - 6,500
min
-1