21 ENGLISH
2.
Adjust the hanger position as shown in the figure
and then tighten the hex socket head bolt.
1
2
3
750 mm
750 mm
100-300 mm
1
The hanger position from the ground
2
The cutting tool position from the ground
3
The horizontal distance between the hanger
and the unguarded part of the cutting tool
Correct handling of the tool
WARNING:
Always position the tool on your
right-hand side.
Correct positioning of the tool allows
for maximum control and will reduce the risk of seri-
ous personal injury caused by kickback.
WARNING:
Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deflected toward you or anyone in the
work vicinity.
Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
WARNING:
To avoid accident, leave more
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enters the
working area, immediately stop the operation.
CAUTION:
If the cutting tool accidentally
impacts a rock or hard object during operation,
stop the tool and inspect for any damage. If the
cutting tool is damaged, replace it immediately.
Use of a damaged cutting tool may result in serious
personal injury.
CAUTION:
Remove the blade cover from the
cutter blade when cutting the grass.
Correct positioning and handling allow optimum control
and reduce the risk of injury caused by kickback.
UR002G
UR003G
When using a nylon cutting head (bump & feed
type)
The nylon cutting head is a dual string trimmer head
provided with a bump & feed mechanism.
To feed out the nylon cord, tap the cutting head against
the ground while rotating.
1
►
1.
Most effective cutting area
NOTICE:
The bump feed will not operate prop-
erly if the nylon cutting head is not rotating.
NOTE:
If the nylon cord does not feed out while
tapping the head, rewind/replace the nylon cord
by following the procedures in the section for the
maintenance.
Содержание UR002GD201
Страница 1: ...INSTRUCTION MANUAL Cordless Grass Trimmer UR002G UR003G ENGLISH Original instructions Read before use ...
Страница 23: ...23 ENGLISH 95 M10L 1 2 3 5 4 6 7 8 4 m 80 mm 100 mm ...
Страница 24: ...24 ENGLISH 96 M10L 1 2 4 3 5 6 4 m 100 mm ...
Страница 25: ...25 ENGLISH B F ECO 4L 1 2 3 4 5 6 7 8 4 m 100 mm 80 mm ...
