Makita tw0250 Скачать руководство пользователя страница 7

Страница: 7 / 10

/ 1

epair

[3] DISASSEMBLY/ASSEMBLY
[3]-4. Baffle plate

DISASSEMBLING

Remove Handle cover. So, F/R Change lever is disassembled together with Handle cover. Remove F/R Change lever
from Handle cover. See

Fig. 14, 15

Take the disassembling step in reverse.

4x18 Tapping
screw (3pcs.)

Handle cover

Separate Handle cover from Motor housing by
removing 4x18 Tapping screws. F/R Change lever
comes with Handle cover.

ASSEMBLING

(1) Separate Hammer case section and armature from Motor housing, as illustrated in

Fig. 2

(2) Baffle plate can be removed as illustrated in

Fig. 13

Handle
cover

Baffle plate

Slide Baffle plate to Handle cover, and pull it up.

Fig. 13

Fig. 14

Fig. 15

[3]-5. F/R Change lever

Handle cover

F/R Change
lever

Push F/R change lever to left or right side
until it stops. Both ends are free from
Handle cover.

Pull the F/R Change lever to the inside
of Handle cover. And remove it.

F/R Change
lever

Содержание tw0250











Результаты поиска

Содержание tw0250

Отзывы:

Похожие инструкции для tw0250

Бренды по названию

Популярные бренды

Makita tw0250, Техническая информация

Результаты поиска

Содержание tw0250

Отзывы:

Похожие инструкции для tw0250

Бренды по названию

Популярные бренды