W
iring diagram
Rib
Switch
Switch trigger
Facing the round side to Armature
side, apply Insulation cover to Field.
And tighten Field with 4x50 Tapping
screw.
Tab Connector
Pass Lead wire with Tab connector
between Rib and Motor housing.
Rib
Field leads wire on the Hammer
case side have to be guided
along the inner wall of Motor
housing.
Guide the Lead wires of Power
supply cord between the wall of
Makita logo side and Rib.
Noise suppressor (if used)
covered by Sponge
TW0250 Name plate side
Viewed from Hammer case side
Makita logo side
Switch
Assemble Field to Motor housing
while facing its Lead wire (orange)
to Switch side in order to connect
orange lead wire to Brush holder of
Makita logo side exactly.
Field lead wire
(orange)
Field lead wire
(purple)
Motor housing
When assembling Field to Motor housing, the Spring terminal of orange lead wire has to be connected to Brush holder
on Makita logo side. Do assembling as illustrated in
Fig. D-2
.
Makita
logo side
Brush holder
Fig. D-2
Fig. D-3
Insulation cover
Put the extra portion of Lead wires
into the space between the inner wall
of Motor housing and Field core.
P 1
0
/ 1
0
