P
3
/
10
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer case complete (cont.)
DISASSEMBLING
Pull off Armature while holding Internal gear cover complete and Hammer case complete by hand
so that they do not separate out.
Hammer case complete
Internal gear cover complete
Hammer case
complete
Remove Hammer case complete from Internal gear cover complete, and then disassemble the
components as illustrated below.
Flat washer 19
(This washer is left in Hammer case complete
due to grease.)
Anvil
Hammer section
Remove Flat washer 8, and then
pull off Pin 6.
Spur gear 32 can be removed
from Hammer section.
Internal gear 71
O ring 58
Internal gear
cover complete
(2) Disassemble Hammer case section as illustrated in Figs 3 and 4.
Flat washer 18
Pin 6 (2pcs.)
Spur gear 32
(2pcs.)
Figs 3
Figs 4
