![background image](http://html1.mh-extra.com/html/makita/hg6031v/hg6031v_instruction-manual_4720786006.webp)
6
English
INSTRUCTIONS FOR USE
Q
Always observe the safety instructions and appli-
cable regulations.
Q
Use only one hand to hold the tool, do not place
your other hand over the air vents.
Prior to operation
Q
Mount the correct accessory for the application.
Q
Set the desired air temperature.
Switching on and off
Q
To switch the tool on, set the on/off switch to
position 1/2/3. Some smoke may be emitted after
switching on, this does not indicate a problem.
Q
To switch the tool off, adjust the lowest temper
-
ature to cool off, then set the on/off switch to
position 0. Let the tool cool down before moving
or storing it.
Temperature setting
Q
Turn ON/OFF switch to 1/2/3, depending on tem-
perature you need.
Detachable front cover
Q
The front cover can be removed when working at
a narrow area.
Be careful of the hot nozzle.
Removing the front cover increases the
risk of burn with the bare hot nozzle.
Stripping paint
Q
Mount an appropriate accessory.
Q
Set a high air temperature.
Q
Switch the tool on.
Q
Direct the hot air onto the paint to be removed.
Q
When the paint softens, scrape the paint away
using a hand scraper.
MOUNTING THE CORRECT ACCESSORY (IF APPLICABLE)
Icon
Description
Purpose
Glass protection nozzle
Protection windows when stripping frames
Reflector nozzle
Soldering pipes
Reduction nozzle
Welding, sleeve shrinking (heat concentrated over small area )
Wide-slot nozzle
Drying, thawing (heat spread over wider area )
Scraper
Stripping paint and varnish
Q
Make sure that the tool is switched off and the nozzle has cooled down.
Q
Falling down nozzle may ignite objects on the floor. Nozzles must be mounted firmly and
secure on the unit.
Q
Touching a hot nozzle can lead to serious burn.Before attaching or replacing a nozzle,
allow the unit to cool down completely or use a suitable tool.
Q
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
Q
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use
only original nozzles according to the table that are suitable for your unit.
Содержание HG6031V
