16 ENGLISH
2.
Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
1
2
4
5
6
7
3
►
1.
Nut
2.
Cup
3.
Clamp washer
4.
Cutter blade
5.
Spindle
6.
Receive washer
7.
Hex wrench
3.
Mount the cutter blade onto the receive washer
so that the arrows on the cutter blade and protector are
pointing in the same direction.
1
1
►
1.
Arrow
4.
Put the clamp washer and cup onto the cutter blade
and then tighten the nut securely by the box wrench.
1
2
3
4
►
1.
Box wrench
2.
Hex wrench
3.
Loosen
4.
Tighten
NOTE:
Tightening torque : 20 - 30 N•m
5.
Remove the hex wrench from the gear case.
To remove the cutter blade, follow the installation proce-
dures in reverse.
Nylon cutting head
NOTICE:
Be sure to use genuine Makita nylon
cutting head.
4
5
3
1
2
►
1.
Nylon cutting head
2.
Spindle
3.
Hex wrench
4.
Loosen
5.
Tighten
1.
Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
2.
Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3.
Remove the hex wrench from the gear case.
To remove the nylon cutting head, follow the installation
procedures in reverse.
OPERATION
Attaching the shoulder harness
WARNING:
Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deflected toward you or anyone in the
work vicinity.
Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
