19 ENGLISH
2.
Remove the standard nozzle by turning the nozzle
counterclockwise using the wrench.
1
2
Fig.40
►
1.
Wrench
2.
Standard nozzle
3.
Remove the O-ring from the standard nozzle, and
then attach it to the ULV nozzle.
1
2
3
Fig.41
►
1.
O-ring
2.
Standard nozzle
3.
ULV nozzle
4.
Attach the ULV nozzle by turning the nozzle clock
-
wise using the wrench.
1
2
Fig.42
►
1.
Wrench
2.
ULV nozzle
NOTICE:
Do not tighten the nozzle too much.
The recommended tightening torque is approxi-
mately 1.0 N•m.
Tightening the nozzle too much may
damage the mounting part for nozzle.
5.
Attach the end nozzle, and then tighten the screw.
1
2
Fig.43
►
1.
Screw
2.
End nozzle