P
7
/ 1
1
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-2. Large spiral bevel gear, Ball bearing 6203DDW
ASSEMBLING
Bearing retainer 50
Make sure that O ring 78 is mounted to
Bearing box as illustrated below.
Assemble Ball bearing 6203DDW and
Bearing retainer 50 to Bearing box.
M5x16 Pan head
screw (3pcs.)
Ball bearing
6203DDW
O ring 78
Note in Assembling of Cup spring 20 to M15-23 Nut
Bearing box
Assemble as illustrated in Figs. 13 and 14.
Lock washer
Flat washer 15
Cup spring 20
Large spiral
bevel gear
Large spiral
bevel gear
Lock
washer
M15-23 Nut
Spindle
complete
Set Spindle complete in place
carefully with Arbor press.
Clamp the flat portions of
Spindle complete with vise,
and assemble the components
of Torque limiter to Spindle.
1R204
1R224
M15-23 Nut
1R223
Pre-setting 1R223 to 55- 60 N.m fastening torque,
tighten M15-23 Circular nut by turning 1R223 counterclockwise.
Fig. 13
Fig. 14
1) Align the center of two Cup springs 20 with that of Spindle
as illustrated below when tightening M15-23 Nut.
Do not to pinch two Cup springs 20 between the round end
of M15-23 Nut and Lock washer as illustrated right.
2) Pay attention to the direction of two Cup springs 20.
Refer to the following illustration and Fig. 13.
Spindle
Lock washer
Spindle
complete
Round end of
M15-23 Nut
Oval top of
M15-23 Nut
Cup spring 20
Cup spring 20
Spindle complete
