P
9
/ 1
1
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-4. Handle R, L
DISASSEMBLING
ASSEMBLING
Fig. 19
Fig. 20
Fig. 21
Remove Handle complete (R) by loosening four 4x25 Tapping screws.
Switch, Power supply cord, Lock button can be replaced.
4x25 Tapping screw
(4pcs.)
Switch
Power supply
cord
Nylon washer 89
Lock button
Disassemble Handle section as illustrated in Fig. 19.
(1) Assemble Nylon washer 89 and Vibration proof rubber to Motor housing complete. Refer to Fig. 19.
(2) Mount Handle complete (L) as illustrated in Figs. 20 and 21.
(3) Assemble Lock button and Compression spring 7 to Handle complete (L) as illustrated in Fig. 22.
(4) Assemble Handle complete (R) to Handle complete (L). Refer to Fig. 19.
Motor housing
complete
After assembling Vibration proof rubber to
Motor housing, align the center line of Protrusion
of Vibration proof rubber to the center line of
depression of Motor housing.
Vibration
proof rubber
Handle
Complete (R)
Handle complete (L)
Remove Handle complete (L).
Nylon washer 89 and Vibration proof rubber
can be replaced.
Center lines
Protrusion of
Vibration proof rubber
depression of
Motor housing
complete
Depression of
Handle complete (L)
Protrusion of
Vibration proof
rubber
Fitting the depression of Handle complete (L)
to the protrusion of Vibration proof rubber,
set Handle complete L in place.
Handle complete (L)
Lock button
Handle complete (L)
Handle complete (L)
Compression spring 7
Fig. 22